OpenFIRE ESP32 Flasher
⚠️ WARNING: You are viewing an obsolete version. Select the latest available release from the menu above for best performance.
-- Select a board --
⚡ Important Instructions:
1. Use a good quality data USB cable.
2. Click Flash and select the port from the popup.
3. If the board doesn't connect, hold down the physical BOOT button on the ESP32 while clicking.
1. Use a good quality data USB cable.
2. Click Flash and select the port from the popup.
3. If the board doesn't connect, hold down the physical BOOT button on the ESP32 while clicking.